TORUS1:[GLL_RAW.INFO]UVS_P1_PB_HDR.DOC UVS Phase 1 File headers: The following list documents the contents of the header information located at the beginning of the UVS data records. All values and reference locations are two byte integers unless otherwise specified. (In an EUV file, you may associate to an Integer*2 to read the header and revert to a byte associate for the data.) These values are valid for all data taken before jupiter ops. After this time, the definitions for several header values change. These values are marked with a # in the list below. Revision date: 31-MAY-1996 JJG Index Values in IDL 00 ERT Year (last 2 digits only) 01 Day of Year 02 Hour 03 Minute 04 Second 05 MSecond 34 SCE Year !Added Feb 13 06 Day of Year 07 Hour 08 Minute 09 Second 10 MSecond 11# Format FID in low 5 bytes;Time flags in top Spacecraft Clock 12 RIM top byte (Construct RIM with [top*256.]+bottom) 13 RIM Least Significant two bytes (bottom) 14 MOD 91 15 MOD 10 16 MOD 8 (=RTI) 17 SCLK Flags 18-28 Data Presence Indicators (0=OK,1=absent,one flag/minor frame) 29 Top 3 bits are final DPIs; bottom (LSB) bit is P/B flag 30# Spare 31 Source indicator (-2=no data (lasp), -1=no data,partial (EDR), 1=certified, 2=manipulated at LASP) 32 Software version number (integer*1000=j.iii) (will be less than 10,000 for phase 1 data files) 33 UVS only: scan direction (0=up,1=down grating) 34 SCE Yr (see above) 35 Number of -1's in scan || Not in EUV 36 Number of 0's in scan || Not in EUV 37# Number of data followed by 0's || Not in EUV 38# UVS: data start locn in JPL array; EUV:=0 39 UVS: Scan number within RIM (range:1-14); EUV:=0 40-46 7 Sync words = 255 47 Starting Wavelength 48 UVS status byte # 1 49 UVS status byte # 2 50 Low Voltage (+10V) 51 Low Voltage ( +5V) 52 High Voltage F-Channel 53 High Voltage N-Channel 54 High Voltage G-Channel 55 Logic Temperature 56 Detector Temperature 57 Limb Sensor 58-585 data Max value is F-Channel: 15-bit word decompressed 586-599# 12 AACS values + 2 spares End