FPI named struct: 'stdMMS_FPImoments' \[PROPOSED\]
 \* numberDensity: \[cm^-3\]
 \* bulkSpeed    : \[km/s\]
 \* bulkAzimuth  : \[deg\]
 \* bulkZenith   : \[deg\]
 \* bulkX        : \[km/s\]
 \* bulkY        : \[km/s\]
 \* bulkZ        : \[km/s\]
 \* PresXX       : \[erg/cm^3\]-->there is a suggestion to change this to nPa
 \* PresXY       : \[erg/cm^3\]-->there is a suggestion to change this to nPa
 \* PresXZ       : \[erg/cm^3\]-->there is a suggestion to change this to nPa
 \* PresYY       : \[erg/cm^3\]-->there is a suggestion to change this to nPa
 \* PresYZ       : \[erg/cm^3\]-->there is a suggestion to change this to nPa
 \* PresZZ       : \[erg/cm^3\]-->there is a suggestion to change this to nPa
 \* TempXX       : \[eV\]
 \* TempXY       : \[eV\]
 \* TempXZ       : \[eV\]
 \* TempYY       : \[eV\]
 \* TempYZ       : \[eV\]
 \* TempZZ       : \[eV\]
 \* heatFlux     : \[(erg/s)/cm^2\]-->there is a suggestion to change this to mW/m^2
 \* heatAzimuth  :\[deg\]
 \* heatZenith   : \[deg\]
 \* heatX        : \[(erg/s)/cm^2\]-->there is a suggestion to change this to mW/m^2
 \* heatY        : \[(erg/s)/cm^2\]-->there is a suggestion to change this to mW/m^2
 \* heatZ        : \[(erg/s)/cm^2\]-->there is a suggestion to change this to mW/m^2
 \* Entropy      : \[erg/K\]-->there is a suggestion to change this but no opinion as to whatElectric Field : [mV/m]
Payload Potential : [V]
Electric Field Power Spectral Density : [(V/m)^2/Hz]
Phase shift : [degrees]
ExB velocity: [km/s]
Poynting Flux : [mW/m^2]
Magnetic Field: [nT]
Magnetic field power spectral density: [nT^2/Hz]
Pressure (magnetic): [nPa]
Current density: [nA/m^2] NOTE: microA/m^2 may be better.