Page History
...
MMS Team members are welcome to ADD ADDITIONAL QUANTITIES as they are defined.
The CDF Format Guide requires that UNITS and SI_CONVERSION must be specified for each parameter.
- It is proposed that conventions should be defined, so that a standard nomenclature is used for these metadata.
- UNITS attribute
- units in Level 2 CDF files shall be taken from the list above
- The units shall be specified as a human-readable ASCII string, using the abbreviations listed above.
- guidelines for unit nomenclature are proposed, below.
- SI_CONVERSION attribute
- Gives the conversion from the MMS unit of measure to SI units
- This attribute allows for plotting/analysis tools to combine MMS data with data from other missions which use different units.
- Guidelines for SI unit nomenclature are proposed, below.
- Requires guidelines for syntax, which are also included below.
Proposed convention for unit nomenclature and SI conversion attribute:
- SI unit symbols to be used for SI conversion (rather than SI unit names) without SI prefixes: e.g. T, rather than nT or Tesla; sr, rather than steradians.
The SI_CONVERSION from nT would then be "1.0e-9>T". - SI prefixes are allowed in variable units, but not in the converted SI unit (units of [km] are required for distances, but the SI conversion must be to [m]).
- Note that the SI unit for angles is radians [rad].
The SI_CONVERSION for angles (in degrees as defined above) would be "pi/180>rad" (Alternative 1: uses division in unit conversion but preserves precision.)
The SI_CONVERSION for angles (in degrees as defined above) would be "0.0174532925>rad" (Alternative 2: gives number in unit conversion but loses precision.) - Dimensionless variables are required (by ISTP standard) to be a blank character. For consistency the conversion should also be a blank character.
The SI_CONVERSION for a dimensionless variable would be " > ". - Units that are already SI (e.g. Hz, V) will have a multiplicative factor of 1, so the SI_CONVERSION for spacecraft potential would be "1.0>V".
...
Overview
Content Tools
Activity
Tasks